Content-type: text/html Manpage of IPSEC_SPIGRP

IPSEC_SPIGRP

Section: File Formats (5)
Updated: 27 Jun 2000
Index Return to Main Contents
 

NAME

ipsec_spigrp - list IPSEC Security Association groupings  

SYNOPSIS

ipsec spigrp

cat /proc/net/ipsec_spigrp

 

DESCRIPTION

/proc/net/ipsec_spigrp is a read-only file that lists groups of IPSEC Security Associations (SAs).

An entry in the IPSEC extended routing table can only point (via an SAID) to one SA. If more than one transform must be applied to a given type of packet, this can be accomplished by setting up several SAs with the same destination address but potentially different SPIs and protocols, and grouping them with ipsec_spigrp(8).

The SA groups are listed, one line per connection/group, as a sequence of SAs to be applied (or that should have been applied, in the case of an incoming packet) from inside to outside the packet. An SA is identified by its SAID, which consists of protocol ("ah", "esp", "comp" or "tun"), SPI (with '.' for IPv4 or ':' for IPv6 prefixed hexadecimal number ) and destination address (IPv4 dotted quad or IPv6 coloned hex) prefixed by '@', in the format <proto><af><spi>@<dest>.  

EXAMPLES

tun.3d0@192.168.2.110
comp.3d0@192.168.2.110 esp.187a101b@192.168.2.110 ah.187a101a@192.168.2.110

is a group of 3 SAs, destined for 192.168.2.110 with an IPv4-in-IPv4 tunnel SA applied first with an SPI of 3d0 in hexadecimal, followed by a Deflate compression header to compress the packet with CPI of 3d0 in hexadecimal, followed by an Encapsulating Security Payload header to encrypt the packet with SPI 187a101b in hexadecimal, followed by an Authentication Header to authenticate the packet with SPI 187a101a in hexadecimal, applied from inside to outside the packet. This could be an incoming or outgoing group, depending on the address of the local machine.

tun:3d0@3049:1::2
comp:3d0@3049:1::2 esp:187a101b@3049:1::2 ah:187a101a@3049:1::2

is a group of 3 SAs, destined for 3049:1::2 with an IPv6-in-IPv6 tunnel SA applied first with an SPI of 3d0 in hexadecimal, followed by a Deflate compression header to compress the packet with CPI of 3d0 in hexadecimal, followed by an Encapsulating Security Payload header to encrypt the packet with SPI 187a101b in hexadecimal, followed by an Authentication Header to authenticate the packet with SPI 187a101a in hexadecimal, applied from inside to outside the packet. This could be an incoming or outgoing group, depending on the address of the local machine.

 

FILES

/proc/net/ipsec_spigrp, /usr/local/bin/ipsec  

SEE ALSO

ipsec(8), ipsec_manual(8), ipsec_tncfg(5), ipsec_eroute(5), ipsec_spi(5), ipsec_klipsdebug(5), ipsec_spigrp(8), ipsec_version(5), ipsec_pf_key(5)  

HISTORY

Written for the Linux FreeS/WAN project <http://www.freeswan.org/> by Richard Guy Briggs.  

BUGS

:-)


 

Index

NAME
SYNOPSIS
DESCRIPTION
EXAMPLES
FILES
SEE ALSO
HISTORY
BUGS

This document was created by man2html, using the manual pages.
Time: 19:04:25 GMT, April 17, 2004